Power Button Board - HP Compaq Presario,Presario F500 Maintenance And Service Manual

Power button board

Description
Power button board (includes power button board cable)
Before removing the power button board, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power cord.
3.
Remove the battery (see
4.
Remove the following components:
5.
Switch cover (see
a.
Keyboard (see
b.
Remove the power button board:
Remove the Phillips PM2.0×3.0 screw (1) that secures the power button board to the computer.
1.
Release the power button board (2) from the computer as far as the cables attached to the board
2.
allow.
Disconnect the speaker assembly cable (1) from the power button board.
3.
Release the ZIF connector to which the power button board cable (2) is connected and disconnect
4.
the cable.
42 Chapter 4 Removal and replacement procedures
Battery on page 29).
Switch cover on page
Keyboard on page 40)
38)
Spare part number
443153-001