Fostex HP-A8MK2 Owner's Manual page 15

Setting item
"DIGITAL FILTER"
Selects the digital filter.
"MSCK SEL"
Selects the master clock of the
DAC.
* The internal clock is always
used when the input source is
set to "USB" or "SD" regardless
of this setting.
"DIRECT"
Selects whether the signal for
the [ANALOG OUT] terminal
goes through volume or not.
* The signals for headphones
always go through volume
regardless of this setting.
"IN/VOL MEM"
Activates the memory function
of the last source and volume.
Setting value
Default: "SHORT DLY SHAP"
You can select from one of the 5 types of digital filters
listed below.
"SHORT DLY SHAP"
"SHORT DLY SLOW"
"SHARP ROLL-OFF"
"SLOW ROLL-OFF"
"SUPER SLOW"
Default: "DIR"
"DIR"
Uses the external clock of the digital input source.
"XTAL"
Uses the high precision internal SPXO clock.
Default: "OFF"
"OFF"
Goes through volume (You can change the volume with
volume)
"ON"
Does not go through volume (You can not change the
volume with volume)
When you change the setting value and press the ENTER
key, "WARNING" is displayed, then "ARE YOU SURE?" will
be displayed. Press the ENTER key again to determine
the setting value.
Default: "DISABLE"
"DISABLE"
The last source and volume are not memorized.
"INPUT"
Switches to the last source automatically at power on.
The volume is set to MUTE.
"VOLUME"
Switches to the last volume automatically at power on.
The source is set to "COX".
"INPUT+VOLUME"
Switches to the last source and volume automatically at
power on.
15