Fostex HP-A8MK2 Owner's Manual page 16

Setting item
"USB MUTE SEL"
Activates cross-fade processing
(volume down) between files
when the input source is set to
"USB".
"SD REPEAT MODE"
Selects the repeat range of the
SD card playback.
"LCD ON/OFF"
Selects the lighting pattern of
the LCD display.
"AUTO POWER OFF"
Selects the ''AUTO POWER OFF''
mode ON or OFF.
"SYSTEM INFO"
Displays the current software
version.
16
Setting value
Default: "OFF"
"OFF"
Play the signal from USB directly. A snapping noise may
be produced between files.
"ON"
Activates cross-fade processing at the beginning and end
of the file. For the continuously recorded sound source,
such as a live recording album, sound may be interrupted
for a moment.
Default: "FOLDER"
"FOLDER"
Repeats the current folder ("F" indicator is displayed).
"ALL"
Repeats the whole card ("A" indicator is displayed).
"SINGLE"
Repeats the current file ("1" indicator is displayed).
Default: "ON"
"ON"
LCD is always on.
"OFF"
The LCD turns off automatically approximately 8 seconds
after the last operation is performed.
Default: ''ON''
"ON":
The HP-A8 will automatically turn OFF the power,
MK2
when the operation continues for about 30 minutes.
"OFF'':
The HP-A8 does not automatically power OFF. i.e., it
MK2
keeps powering ON even after 30 minutes of operation.
Default: "VerX.XXX"
"VerX.XXX"
Current version.
"VERSION UP"
Executes the update. (page 18)
"RESET"
Returns to the factory settings (page 17).