Caps Lock Led Board - HP Compaq Presario,Presario C770 Maintenance And Service Manual

Remove the top cover (3).
7.
Reverse this procedure to install the top cover.

Caps lock LED board

Description
Caps lock LED board (includes cable)
Before removing the caps lock LED board, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
3.
then unplugging the AC adapter from the computer.
Remove the battery (see
4.
Remove the following components:
5.
Hard drive (see
a.
Optical drive (see
b.
Keyboard (see
c.
Switch cover (see
d.
Display assembly (see
e.
Top cover (see
f.
Remove the caps lock LED board:
Turn the top cover upside down, with the front toward you.
1.
Remove the Phillips PM2.0×4.0 screw (1) that secures the caps lock LED board to the top cover.
2.
64 Chapter 4 Removal and replacement procedures
Battery on page 40).
Hard drive on page 41)
Optical drive on page
Keyboard on page 50)
Switch cover on page
Display assembly on page
Top cover on page 62)
48)
53)
55)
Spare part number
454948-001