Remove the four Phillips PM2.5×7.0 screws (2) that secure the display bezel top edge to the display
4.
assembly.
Flex the inside edges of the left and right sides (1) and the top edge (2) of the display bezel until
5.
the bezel disengages from the display enclosure.
Release the display bezel top edge (3). Display bezels are available using the following spare part
6.
numbers:
454909-001 (for use only with HP G7000 computer models without a Web camera; includes
●
microphone; includes openings for camera module and microphones)
462445-001 (for use only with HP G7000 computer models with a Web camera; includes
●
openings for microphones)
454910-001 (for use only with Compaq Presario C700 computer models without a Web
●
camera; includes openings for microphones)
462446-001 (for use only with Compaq Presario C700 computer models with a Web camera;
●
includes openings for microphones)
Remove the screws (1), and then release the camera module (2) from the display enclosure as far
7.
as the camera module cable allows.
Component replacement procedures
61