Special Original Specifications - Epson B11B259201 User Manual

8. Turn off the Detect Double Feed setting on the Main Settings tab in Epson Scan 2 when scanning
special originals.
Note: If the Document Size setting on the Main Settings tab in Epson Scan 2 is set to Auto Detect,
Paper Skew is automatically selected as the Correct Document Skew setting.
9. If necessary during scanning, adjust the position of the stopper on the output tray extension to fit the
ejected originals.
Note: If thicker paper does not eject properly or falls from the output tray, push in the output tray and
allow the originals to eject freely onto the surface below the scanner. If the scanned images are
affected by the originals ejecting below the scanner, try placing the scanner on the edge of a table
where the ejected originals can drop freely.

Special Original Specifications

Parent topic:
Special Original Specifications
You can load photos, envelopes, or large, thick, or folded originals that meet these specifications in your
scanner.
Note: Photos scanned using a document scanner may not have the same color depth as the original.
Use a flatbed photo scanner to achieve the best color reproduction of photos.
Paper type
Large originals (plain
paper, fine paper, or
recycled paper)
(load only in a carrier
sheet)
Photos
(load only in a carrier
sheet)
Loading Originals
Paper size
Up to this size: A3 (11.7 × 16.5
inches [297 × 420 mm])
Up to this size: A4 (8.3 × 11.7
inches [210 × 297 mm])
Paper thickness
0.012 inch (0.3 mm)
maximum
(excluding the
thickness of the carrier
sheet)
0.012 inch (0.3 mm)
maximum
(excluding the
thickness of the carrier
sheet)
54
Loading capacity
10 carrier sheets
10 carrier sheets