Plastic And Laminated Card Specifications; Loading Special Originals - Epson B11B259201 User Manual

5. Turn off the Detect Double Feed setting on the Main Settings tab in Epson Scan 2 when scanning
the cards.
Note: If you do not disable the Detect Double Feed setting and a double feed error occurs, remove
the plastic or laminated card from the input tray and reload it. Press the down arrow button on the
control panel, and select DFDS Function > On to disable the Detect Double Feed setting for the
next scan. The DFDS Function setting only disables the Detect Double Feed setting for one scan.

Plastic and Laminated Card Specifications

Parent topic:
Plastic and Laminated Card Specifications
You can load original plastic and laminated cards that meet these specifications in your scanner.
Paper type
Plastic cards,
embossed (ISO 7810
ID-1 compliant)
Plastic cards, standard
(ISO 7810 ID-1
compliant)
Laminated cards
* Resolution must be 300 dpi or less and slow mode disabled
Note: Plastic cards with glossy surfaces may not scan properly.
Parent topic:

Loading Special Originals

You can load photos or large, thick, or folded originals in the input tray using one or more carrier sheets.
You can also load envelopes. Make sure the originals meet the specifications for special originals before
loading them.
Loading Originals
Paper size
2.1 × 3.3 inches
(54 × 85.6 mm)
4.7 × 5.9 inches (120
× 150 mm) or smaller
Loading Plastic and Laminated Cards in the Input Tray
Paper thickness
0.05 inch (1.24 mm)
maximum
0.03 inch (0.76 mm) to
0.04 inch (1.1 mm)*
smaller than 0.03 inch
(0.76 mm)
0.03 inch (0.76 mm)
maximum
46
Loading capacity
1 card (horizontal)
5 cards (horizontal)
5 cards (horizontal)
1 card