Table of Contents
Advertisement
Warning: Forbid to install SIM/UIM card when powered!
Installation of antenna:
Screw the SMA male pin of the antenna to the female SMA outlet of the IP
MODEM tightly. Warning: The antenna must be screwed tightly, or the signal quality
of antenna will be influenced!
Installation of cable:
Insert DB9F end of the RS232/RS485 data cable into the DB9M interface of IP
MODEM, and connect the other end with user's device.
The signal connection of the RS232 data cable is as follows:
DB9F
1
RXD 2
TXD 3
4
GND 5
6
7
8
9
RS232 data cable
DB9F
1
2 RXD
3 TXD
4
5GND
6
7
2.4 Power
8
9
supply power above 4W.
Four-Faith Smart Power Technology Co., Ltd.
The signal connection of the RS485 data cable is as follows:
DB9F
1
2
3
4
5
A 6
7
8
B 9
RS485 data cable
The power range of the IP MODEM is DC 5
Warning: When we use other power, we should make sure that the power can
We recommend user to use the standard DC 12V/0.5A power adaptor.
A (RED)
B (BLACK)
~
35V
Advertisement
Table of Contents
