Subscribe to Our Youtube Channel
Related Manuals for Four-Faith F2203
Summary of Contents for Four-Faith F2203
-
Page 1: User Manual
Four-Faith Smart Power Technology Co., Ltd. F2203 CDMA IP MODEM USER MANUAL Web: www.four-faith.hk Email: allen@four-faith.com Tel: +86-17750019379 Add: Floor 11, Area A06, No 370, chengyi street, Jimei, Xiamen, China... - Page 2 Four-Faith Smart Power Technology Co., Ltd. Web: www.four-faith.hk Email: allen@four-faith.com Tel: +86-17750019379 Add: Floor 11, Area A06, No 370, chengyi street, Jimei, Xiamen, China...
-
Page 3: Table Of Contents
Four-Faith Smart Power Technology Co., Ltd. Contents Contents Chapter 1 Brief Introduction of Product................4 1.1 General........................4 1.2 Features and Benefits..................4 1.3 Working Principle....................5 1.4 Specifications..................... 5 Chapter 2 Installation Introduction.................. 7 2.1 General........................7 2.2 Encasement List....................7 2.3 Installation and Cable Connection..............7 2.4 Power........................ -
Page 4: Chapter 1 Brief Introduction Of Product
High-powered industrial 16/32 bits CPU Support low-consumption mode, including sleep mode, scheduled online/offline mode, scheduled power-on/power-off mode(optional) F2203 CDMA IP MODEM is a kind of cellular terminal device that provides data Housing: iron, providing IP30 protection. transfer function by public CDMA network. -
Page 5: Working Principle
Four-Faith Smart Power Technology Co., Ltd. Support TCP server and support multi TCP client connection(optional) 1.4 Specifications Support double data centers, one main and another backup Support multi data centers and it can support 5 data centers at the same time Cellular Specification ... - Page 6 Four-Faith Smart Power Technology Co., Ltd. SIM/UIM Standard 3V/1.8V user card interface, 15KV ESD protection Operating Temperature Power Standard 3-PIN power jack, reverse-voltage and overvoltage protection Storage -40~+85ºC（-40~+185℉） Temperature Operating 95% ( Non-condensing) Humidity Power Input Item Content Standard Power DC 12V/1.5A...
-
Page 7: Chapter 2 Installation Introduction
Four-Faith Smart Power Technology Co., Ltd. Name Quantity Remark IP MODEM host Antenna Power adapter RS232 data cable optional RS485 data cable optional Manual CD Certification card Maintenance card Chapter 2 Installation Introduction 2.3 Installation and Cable Connection 2.1 General... - Page 8 Four-Faith Smart Power Technology Co., Ltd. MODEM tightly. Warning: The antenna must be screwed tightly, or the signal quality of antenna will be influenced! Installation of cable: Insert DB9F end of the RS232/RS485 data cable into the DB9M interface of IP MODEM, and connect the other end with user’s device.
-
Page 9: Power
Four-Faith Smart Power Technology Co., Ltd. 2.5 Indicator Lights Introduction The signal connection of the RS485 data cable is as follows: The IP MODEM provides three indicator lights: “Power”, “ACT”, “Online”. DB9F Indicator State Introduction Light Power IP MODEM is powered on... -
Page 10: Chapter 3 Configuration
Four-Faith Smart Power Technology Co., Ltd. Chapter 3 Configuration 3.1 Configuration Connection Before configuration, it’s necessary to connect the IP MODEM with the configure PC by the shipped RS232 or RS232-485 conversion cable as following. 3.2 Configuration Introduction There are two ways to configure the IP MODEM: Configuration software tool: All the settings are configured through the shipped software tool. -
Page 11: Run The Configure Tool: Ip Modem Configure.exe
Four-Faith Smart Power Technology Co., Ltd. command, you should make IP MODEM enter configure state. The steps how to “Close”, it shows the serial port now has been opened. If the text is “Open”, you make IP MODEM enter configure state, please refer to appendix. -
Page 12: Configuration
Four-Faith Smart Power Technology Co., Ltd. AT command: 3.5 Configuration AT+SVRCNT=x x: Data Service Center number Note: every AT command is terminated with a enter character. 3.5.1 Data Service Center Settings ◆Main Center Addr+Port: Settings on this page are the parameters related to Data Service Center(DSC). - Page 13 Four-Faith Smart Power Technology Co., Ltd. xxx: The IP address or domain name AT command of the Backup DSC port Example: AT+PTSEC=xxx Set IP address of center 3 as 166.111.8.238, and port 5001, the AT command is as xxx: The port value following: ◆Multi DSC Configuration...
-
Page 14: Ip Modem Settings
Four-Faith Smart Power Technology Co., Ltd. aaa.bbb.ccc.ddd: the DNS server IP address According to different application requirements, there are several protocol ◆ Center 2~5 DNS Server workmode to choose. PROT ： Heartbeat packet with TCP protocol, Data transmission with TCP protocol, heartbeat packet and application data transmission are in the same TCP connection. - Page 15 Four-Faith Smart Power Technology Co., Ltd. ◆ Trigger Type Debug information is used to debug software when there is software problem. 0 --- no debug information output 1 --- simple prompt information output Normally, IP MODEM always keeps online and always be ready for data 2 --- detail debug information output transmission.
- Page 16 Four-Faith Smart Power Technology Co., Ltd. AT+SERMODE=xxx xxx: one of the above serial mode ◆ Auto Back To Main Server ◆ Communication Baudrate 0 --- No 1 ---Yes --- 110 bps This item is only valid when you set “Data Center Number” as 1. In this mode, IP --- 300 bps MODEM will switch to backup center when main center have problems.
- Page 17 Four-Faith Smart Power Technology Co., Ltd. AT+IDNT=aabbccdd AT+BYTEINT=xxx xxx: bytes interval time value（millisecond） aabbccdd: the identity number of IP MODEM ◆ Custom Register String ◆ SIM Card No The phone number of the SIM card . This item is only valid when the WorkMode is TCST. It’s the self defined register string.
-
Page 18: Other Settings
Four-Faith Smart Power Technology Co., Ltd. AT+LINKRGST=xxx xxx：self defined heartbeat string ◆ Connect Retry Times, Reconnect Time Interval 0 --- Yes, enable transfer meaning 1 --- No, disable transfer meaning This item is only valid when the WorkMode is PROT. If this item is set to 0, IP MODEM will transfer meaning to 0xfd and 0xfe. - Page 19 Four-Faith Smart Power Technology Co., Ltd. APN: access point name. Username: username to login the ISP network. Password: password to login the ISP network Your local SMS center number Call Center: the call center phone number AT Command: AT Command of APN:...
- Page 20 Four-Faith Smart Power Technology Co., Ltd. type, IP MODEM will keeps in idle state until it receives the trigger phone call, then it will connect to the center. This item is valid only when the “Trigger Type” is DATA or MIXD, IP MODEM...
-
Page 21: Functions
Four-Faith Smart Power Technology Co., Ltd. ◆ Factory setting This item is valid only when the “Data Center Number” is greater than 1. Restore to factory settings When one of the configured data center lost connection, IP MODEM will try to ◆... -
Page 22: Work State Switch
Four-Faith Smart Power Technology Co., Ltd. ◆ Restore Config Restore settings from a previous saved configure file Appendix 3.7 Work State Switch The following steps describe how to make IP MODEM enter configure state with the Windows XP Hyper Terminal. - Page 23 Four-Faith Smart Power Technology Co., Ltd. 2. Input connection name, choose “OK” 4. Configure the serial port parameters as following, choose “OK” 3. Choose the correct COM port which connect to IP MODEM, choose “OK” Bits per second: 115200 Data bits: 8...
- Page 24 Four-Faith Smart Power Technology Co., Ltd. Re-power IP MODEM, put mouse focus on the Hyper Terminal and press “s” key continuously until IP MODEM enter configure state as following 5. Complete Hyper Terminal operation, It runs as following Web: www.four-faith.hk Email: allen@four-faith.com...
- Page 25 Four-Faith Smart Power Technology Co., Ltd. 7. IP MODEM has entered configure state, you can configure the parameters through AT command. Web: www.four-faith.hk Email: allen@four-faith.com Tel: +86-17750019379 Add: Floor 11, Area A06, No 370, chengyi street, Jimei, Xiamen, China...
Need help?
Do you have a question about the F2203 and is the answer not in the manual?
Questions and answers