Page 1
Product Name: Total: F2003 Series User Manual The user manual is suitable for the following model: Model Product Type F2003 GSM IP MODEM Xiamen Four-Faith Communication Technology Co., Ltd. Add:J1-J3,3rd Floor,No.44,GuanRi Road,SoftWare Park,XiaMen,China Zip Code:361008 Tel:+86 592-6300326 ,6300325,6300324 Fax:+86 592-5912735 http://www.fourfaith.com...
Page 2
User Manual Files Revised Record Date Version Remark Author Xiamen Four-Faith Communication Technology Co.,Ltd. Page 2 of 22 Add: J1-J3,3 Floor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China http://www.fourfaith.com Tel: +86 592-6300326 6300325 6300324 Fax:+86 592-5912735...
Page 3
Four-Faith Communication Technology Co., Ltd. Without written permission, all commercial use of the files from Four-Faith are forbidden, such as copy, distribute, reproduce the files, etc., but non-commercial purpose, downloaded or printed by individual (all files shall be not revised, and the copyright and other proprietorship notice shall be reserved) are welcome.
Page 4
User Manual Xiamen Four-Faith Communication Technology Co.,Ltd. Page 4 of 22 Add: J1-J3,3 Floor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China http://www.fourfaith.com Tel: +86 592-6300326 6300325 6300324 Fax:+86 592-5912735...
RS485 data cable optional Manual CD Certification card Maintenance card 2.3 Installation and Cable Connection : (unit: mm) Dimension Xiamen Four-Faith Communication Technology Co.,Ltd. Page 10 of 22 Add: J1-J3,3 Floor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China http://www.fourfaith.com Tel: +86 592-6300326 6300325 6300324 Fax:+86 592-5912735...
Page 11
Insert DB9F end of the RS232/RS485 data cable into the DB9M interface of IP MODEM, and connect the other end with user’s device. The signal connection of the RS232 data cable is as follows: Xiamen Four-Faith Communication Technology Co.,Ltd. Page 11 of 22 Add: J1-J3,3 Floor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China...
Warning: When we use other power, we should make sure that the power can supply power above 4W. We recommend user to use the standard DC 12V/0.5A power adaptor. Xiamen Four-Faith Communication Technology Co.,Ltd. Page 12 of 22 Add: J1-J3,3 Floor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China...
BLINK Data is communicating No data Online IP MODEM has logged on network IP MODEM hasn’t logged on network Xiamen Four-Faith Communication Technology Co.,Ltd. Page 13 of 22 Add: J1-J3,3 Floor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China http://www.fourfaith.com Tel: +86 592-6300326 6300325 6300324 Fax:+86 592-5912735...
3.2 Enter Configure State Run FfSmsIP MODEMConfig-En.exe configure tool, as following: Click “Open” button, State column displays the following information, Software is waiting IP MODEM enter configure state. Xiamen Four-Faith Communication Technology Co.,Ltd. Page 14 of 22 Add: J1-J3,3 Floor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China http://www.fourfaith.com...
IP MODEM has been in configure state, It’s ready for configuring its parameters. 3.3 Configuration 3.3.1 Serial Port Parameters Baud rate The serial port communication speed AT Command: AT+IPR=xxxx Xiamen Four-Faith Communication Technology Co.,Ltd. Page 15 of 22 Add: J1-J3,3 Floor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China http://www.fourfaith.com Tel: +86 592-6300326 6300325 6300324 Fax:+86 592-5912735...
In this mode, IP MODEM can send any characters(0x00 ~ 0xff) to peer phone, So, it can be used in industrial monitor applications. AT Command: AT+HEXSMS=x x: 0 or 1 ,0 normal SMS,1 HEX SMS Xiamen Four-Faith Communication Technology Co.,Ltd. Page 17 of 22 Add: J1-J3,3 Floor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China http://www.fourfaith.com Tel:...
IP MODEM will send the serial data to peer phone when two bytes transmit time interval larger than this item value. AT Command: AT+BYTEINT=xxx xxx: bytes interval value Xiamen Four-Faith Communication Technology Co.,Ltd. Page 19 of 22 Add: J1-J3,3 Floor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China http://www.fourfaith.com Tel:...
2. Input connection name, choose “OK” 3. Choose the correct COM port which connect to IP MODEM, choose “OK” 4. Configure the serial port parameters as following, choose “OK” Xiamen Four-Faith Communication Technology Co.,Ltd. Page 20 of 22 Add: J1-J3,3 Floor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China...
Page 21
Flow control: None 5. Complete Hyper Terminal operation, It runs as following Re-power IP MODEM, put mouse focus on the Hyper Terminal and press “s” key Xiamen Four-Faith Communication Technology Co.,Ltd. Page 21 of 22 Add: J1-J3,3 Floor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China http://www.fourfaith.com...
Page 22
User Manual continuously until IP MODEM enter configure state as following 7. IP MODEM has entered configure state, you can configure the parameters through AT command. Xiamen Four-Faith Communication Technology Co.,Ltd. Page 22 of 22 Add: J1-J3,3 Floor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China http://www.fourfaith.com...
Need help?
Do you have a question about the F2003 Series and is the answer not in the manual?
Questions and answers