Installing The Low Profile Center Expansion Card - Supermicro SuperServer SYS-6029U-T Series User Manual

Installing the Low Profile Center Expansion Card

Riser Card Slot
Figure 3-18. Installing Low Profile Expansion Card
Installing the Low Profile PCI Expansion Card (
1. Power down the system and remove the top chassis cover.
2. If necessary, remove the full height expansion card to access the low profile riser card
slot, pictured above.
3. Insert the expansion card into the riser card slot while aligning the rear PCI shield into
the chassis. Add the screw to secure the PCI shield.
4. Replace the full height expansion card above the low profile card if necessary, then
replace the chassis cover.
Chapter 3: Maintenance and Component Installation
)
4
57