Supermicro SuperServer SYS-6029U-T Series User Manual page 124

SuperServer 6029U-T Series User's Manual
TestName: Security
State: Ok
Message:
The security check succeeded.
TestName: FW
State: Ok
Message:
The firmware consistency and settings check succeeded.
Preferences
Use this submenu to display or modify user preferences.
View and/or modify user preferences.
Default DIMM ID:
Use this feature to modify the default display of DIMM identifiers. The options are Handle
and UID.
Capacity units:
This feature is to modify the default units for displaying capacities. Use auto (x1024) or
Auto_10 (x1000) to automatically select the best format. The options are Auto, Auto_10,
B, MB, MiB, GB, GiB, TB, and TiB .
App Direct settings:
This feature is to view or modify the interleaving settings for creating App Direct capacity.
The default setting is 4KB_4KB (Recommended).
App Direct granularity:
This feature is to or modify the minimum App Direct granularity per DIMM. The options are
Recommended and 1.
Driver Health
This submenu displays the health status of the drivers and controllers as detected by the
system. The following information is displayed.
Intel(R) DCPMM 1.0.0.3380 Driver Healthy
Intel(R) DCPMM Controller Healthy
124