Cooling System Cleaning; Spark Arrester Muffler - Echo CS-361P Operator's Manual

Hide thumbs Also See for CS-361P:
Table of Contents

Advertisement

CS-361P
Some tree sap and resins are corrosive. Thoroughly wash the guide
bar and sprocket areas after each use, then coat metal parts with light
oil.

Cooling System Cleaning

• Check periodically.
• Clogged cylinder cooling fins (A)
will result in poor engine cooling.
1.
Remove cylinder cover and
starter.
2.
Use compressed air or wooden
tool to remove dirt and dust from
between fins to let cooling air
pass easily.

Spark Arrester Muffler

• The spark arrester muffler controls the exhaust noise and prevents hot,
glowing particles of carbon from leaving the muffler.
• Make sure the spark arrester screen is in good repair and properly seated
in the muffler.
• Certain internal combustion engines operated on forest, brush, and/or
grass-covered areas in the states of Washington, Oregon, Idaho,
California, Minnesota, New Jersey and Maine, are required to be
equipped with a spark arrester.
This requirement also applies to all U.S. Forest Service lands. In some of
these areas, the spark arrestor system must be certified per USDA Forest
Service Regulation SAE J335.
Check with your local or state authorities for specific regulations in your
area. Failure to follow these requirements is a violation of the law.
X7503323307
© 03/22 ECHO Incorporated
MAINTENANCE
A
47

Advertisement

Table of Contents
loading

Table of Contents