Table of Contents
Advertisement
CS-361P
4.
Move stop switch (A) to "RUN"
position.
5.
Push purge pump (B) three to
four times or until fuel is visible in
purge pump.
6.
Pull choke control knob all the
way OUT (CLOSED [
position).
7.
Securely hold the chain saw and
pull starter handle several times
until first starting sound.
8.
Push choke control knob all the
way IN (OPEN [
position).
9.
Pull starter handle to start the
engine.
Note: Do not pull starter rope out to the maximum possible position.
Do not allow recoil handle to snap back against the case.
If engine does not start after five pulls, repeat instructions.
Do not increase engine speed while chain brake is locked.
Severe brake damage will result.
X7503323307
© 03/22 ECHO Incorporated
] choke
]choke
OPERATION
A
B
31
Advertisement
Table of Contents
