Page 1
CS-330T, CS-360T 00-33A-01 CONTENTS INTRODUCTION page 1 SERVICE INFORMATION ......2 We are constantly working on technical 1-1 Specification ..........2 improvement of our products. For this reason, 1-2 Technical data ..........3 technical data, equipment and design are 1-3 Torque limits ..........4 subject to change without notice.
Page 2
CS-330T SERVICE INFORMATION CS-360T 1 SERVICE INFORMATION 1-1 Specifications Model CS-330T CS-360T Dimensions Length* mm(in) 277 (10.9) Width mm(in) 247 (9.7) Height mm(in) 214 (8.4) Dry weight* kg(lb) 3.6 (7.9) Engine Type KIORITZ, air-cooled, two-stroke, single cylinder Rotation Clockwise as viewed from the output end Displacement 32.6 (1.989)
Adjustable : 1.5 - 13 (0.05 - 0.40) mL/min(U.S.fl.oz./min) (Factory set 7 mL/min) BTDC: Before top dead center. *CS-330T: With 14 in. guide bar and saw chain. CS-360T: With 16 in. guide bar and saw chain. **Set idle adjust screw to contact throttle plate before initial setting.
Page 4
CS-330T SERVICE INFORMATION CS-360T 1-3 Torque limits Descriptions Size kgf•cm N•m in•lbf Starter Starter pawl M 5* 40 - 60 4 - 6 35 - 50 system Starter case 15 - 25 1.5 - 2.5 13 - 22 Ignition Magneto rotor (Flywheel)
Page 5
CS-330T SERVICE INFORMATION CS-360T 1-5 Service Limits 5K269 5K270 5K271 5K272 5K273 5K016 5K042 5K274 5K173 5K174 5K190 5K191 Description CS-330T CS-360T A Cylinder bore When plating is worn and aluminum can be seen B Piston outer diameter Min. 35.91 (1.414) 37.88 (1.491)
Need help?
Do you have a question about the CS-330T and is the answer not in the manual?
Questions and answers