Table of Contents
Advertisement
ASSEMBLY
5.
Unlock the chain brake, and
mount guide bar on studs (C)
and slide toward sprocket (E) to
make saw chain installation
easier. Install chain with cutters
on top of guide bar facing
forward.
6.
Install the sprocket guard over
the guide bar studs. Ensure
chain tension adjuster pin (F) fits
into the guide bar adjuster hole (D). Tighten sprocket guard nuts finger
tight.
7.
Adjust saw chain tension, as
instructed in "Adjustment, Chain
Tension".
Adjusting Chain Tension
Always loosen sprocket guard nuts before turning the chain tension
adjuster, otherwise the sprocket guard and tensioner will be
damaged.
1.
Release the cylinder cover latches, and remove the cylinder cover.
Remove spark plug lead.
2.
Unlock chain brake and loosen
sprocket guard nuts.
24
C
E
B
Unlock chain brake
© 03/22 ECHO Incorporated
CS-361P
D
A
F
X7503323307
Advertisement
Table of Contents
