Table of Contents
Advertisement
CS-361P
Setting the Saw Chain
• For setting saw chain, round file
(4.0 mm [5/32 in.] diameter) and
flat file are used.
• Push file as shown.
• To keep correct position and
correct angle, use a file holder.
• Hold the file horizontally.
• Place depth gauge tool firmly on
guide bar so that depth gauge
protrudes. Then file top of depth
gauge with the flat file until flat
with top of the depth gauge tool.
• Be sure 1/5th of the file diameter
remains above cutter edge.
X7503323307
© 03/22 ECHO Incorporated
MAINTENANCE
Depth Gauge Tool
1/5th
30°
Keep this angle
90°
51
Advertisement
Table of Contents
