Setting A Multiboot Express Prompt - HP Compaq NW8000 Software Manual

MultiBoot

Setting a MultiBoot Express Prompt

To set the notebook to display the MultiBoot startup location
menu each time the notebook is started or restarted with
Computer Setup:
1. Open Computer Setup by turning on or restarting the
notebook. Press
message is displayed in the lower left of the screen.
❏
❏
2. Use the arrow keys to select Advanced > Boot Options, then
press
3. In the Express Boot Popup Delay (Sec) field, select the length
of time in seconds that you want the notebook to display
the startup location menu before it defaults to the current
MultiBoot setting. (When 0 is selected, the Express Boot
startup location menu is not displayed.)
4. To save your settings and exit Computer Setup, use the arrow
keys to select File > Save Changes and Exit, then follow the
instructions on the screen.
Your preferences are set when you exit Computer Setup and
take effect when the notebook restarts.
6–6
f10
To change the language, press
For navigation instructions, press
enter.
while the F10 = ROM Based Setup
f2.
f1.
Software Guide