Selecting from the Tools Menu
Select
HDD Self Test Options
Selecting from the Advanced Menu
Select
Language (or press
Boot options
Device options
Software Guide
f2
)
To Do This
Run a quick or comprehensive self test on
any hard drive in the system.
To Do This
Change the Computer Setup language.
■
Enable/disable QuickBoot, which
starts the notebook more quickly by
eliminating some startup tests. (If you
suspect a memory failure and want
to test memory automatically during
startup, disable QuickBoot.)
■
Enable/disable MultiBoot, which sets
a startup sequence that can include
most bootable devices and media in
the system. For details, refer to the
"MultiBoot" chapter.
■
Set the boot order.
■
Enable/disable Num lock mode at
startup.
■
Enable/disable multiple standard
pointing devices at startup. (To set the
notebook to support only a single,
usually nonstandard, pointing device
at startup, select Disable.)
■
Select a parallel port mode: EPP
(Enhanced Parallel Port), standard,
bidirectional, or ECP (Enhanced
Capabilities Port).
Computer Setup
(Continued)
8–5