Multiboot Preferences; Setting A New Default Boot Sequence - HP Compaq NC6220 Hardware And Software Manual

MultiBoot Preferences

There are 2 ways to set MultiBoot sequences:
■
Set a new default boot sequence that the notebook uses each
time it starts up.
– or –
■
Use variable boot sequences using MultiBoot Express. This
feature prompts you for a startup device each time the
notebook is started or restarted.

Setting a New Default Boot Sequence

To set a startup sequence that the notebook uses each time it is
started or restarted with Computer Setup:
1. Open Computer Setup by turning on or restarting the
notebook. Press
message is displayed in the lower-left corner of the screen.
❏
❏
2. Use the arrow keys to select the Advanced menu > Boot
Options, and then press
3. Toggle the MultiBoot field to Enable.
4. Toggle the Boot Order fields to the boot sequence that you
prefer.
5. Save your preferences and exit Computer Setup by using the
arrow keys to select File > Save Changes and Exit. Then
follow the instructions on the screen.
Your preferences are set when you exit Computer Setup and take
effect when the notebook restarts.
Hardware and Software Guide
f10
To change the language, press
For navigation instructions, press
while the F10 = ROM Based Setup
f2.
enter.
f1.
MultiBoot
B–6