HP Compaq NC6220 Hardware And Software Manual page 77

To turn the ambient light sensor on and off using a hotkey,
press
fn+f11.
You can turn on and off the ambient light sensor using the Quick
Launch Buttons software:
1. Open the Quick Launch Buttons software:
❏
– or –
❏
2. Select the Advanced tab.
3. Select or deselect the Enable Ambient Light Sensor
check box.
4. Select Apply, and then select OK.
Hardware and Software Guide
Select Start > Control Panel > Printers and Other
Hardware > Quick Launch Buttons.
Double-click the Quick Launch Buttons software icon in
the notification area.
Pointing Devices and Keyboard
3–16