Chapter 5 — Troubleshooting and Maintaining the SR61T
44
9 For USB cables only, scan the Firmware upgrade bar code that
appears on the screen then click OK. For other cables, go directly
to the next step.
Note: If your scanner cannot scan the bar code on your computer
screen see
"Problems and Possible Solutions" on page
the firmware upgrade bar code. Print the page out and scan the bar
code.
10 Select the Com port and parameters (if necessary) and deselect the
Display help check box. Click Next.
Note: You can find the COM port by opening the Windows Device
Manager (Open the Windows Control Panel and click on
System. Click on the Hardware tab and then click on the Device
Manager button.). The Intermec Virtual COM port is listed under
Ports (COM & LPT).
11 Click Start download.
For RS-232 cables only, scan the Firmware upgrade bar code that
appears on the screen and click OK.
SR61T Tethered Scanner User's Guide
39to find