Installing Software - HP Compaq NC6110 Hardware And Software Manual

Multimedia

Installing Software

✎
To use CDs or DVDs on notebooks shipped with no optical
drive, you will need to use an optional external MultiBay or
MultiBay II.
To install software from a CD included with the notebook:
1. Insert the software CD into the optical drive (select models
only) or into an optional external MultiBay or MultiBay II.
❏
❏
2. Select OK.
3. When the installation wizard is displayed, follow the
installation instructions on the screen.
4. Restart the notebook if prompted.
✎
Repeat the installation procedure for all software you want to
install.
✎
WinDVD Creator has special drive requirements for proper
installation. To install WinDVD Creator, refer to the instructions
provided with the InterVideo WinDVD Creator CD.
4–10
If Autorun is enabled an installation wizard is displayed.
If Autorun is disabled, select Start > Run. Then enter:
x:\setup.exe
where is your CD drive designation.
x
Hardware and Software Guide