Upgrading The Memory Module In The Primary Memory Module Slot - HP Compaq NC6110 Hardware And Software Manual

Hardware Components
Upgrading the Memory Module in the
Primary Memory Module Slot
✎
Your notebook may look slightly different from the illustrations
in this section.
To add a memory module to the primary memory module slot:
1. Shut down the notebook. (If you are not sure whether the
notebook is off or in hibernation, turn the notebook on by
pressing the power/standby button. Then shut down the
notebook through the operating system.)
2. Disconnect all external devices connected to the notebook.
3. Disconnect the power cord.
4. Remove any battery packs from the notebook.
5. Turn the notebook upside down.
6. Loosen the memory module cover screw 1.
7. Lift the memory module cover 2 away from the notebook.
5–26 Hardware and Software Guide