HP Compaq NC6110 Hardware And Software Manual page 68

To fully discharge a battery pack:
1. Right-click the Power Meter icon in the notification area
(at the far right of the taskbar), and then select Adjust Power
Properties.
– or –
Access the Power Schemes tab by selecting Start >
Control Panel > Performance and Maintenance >
Power Options > Power Schemes tab.
2. Make a note of the 4 settings in the Running on batteries
column so that you can reset them after the calibration.
3. Set the 4 options to Never.
4. Select OK.
5. Disconnect the notebook from the external power source, but
do not turn off the notebook.
6. Run the notebook on battery power until the battery pack is
fully discharged. The battery light begins to blink in an amber
color when the battery pack has discharged to a low-battery
condition. When the battery pack is fully discharged, the
battery light is turned off and the notebook shuts down.
Hardware and Software Guide
Power
2–31