Using Standby With Infrared; Connecting A Usb Device - HP Compaq NC6110 Hardware And Software Manual

Using Standby with Infrared

Standby is not compatible with infrared transmission. If the
notebook is in standby, an infrared transmission cannot be
initiated. If standby is initiated during an infrared transmission,
the transmission stops. To resume from standby, press the
power/standby button. The transmission resumes when the
notebook resumes from standby. However, any program that was
using the infrared transmission when standby was initiated may
not continue at the point it was stopped. For example, if a
program was printing when standby was initiated, the program
resumes transmission after the notebook resumes, but the print
job may not resume.

Connecting a USB Device

Universal Serial Bus (USB) is a hardware interface that can
be used to connect optional external devices, such as a USB
keyboard, mouse, drive, printer, scanner, or hub, to the notebook.
Depending on your notebook model, the notebook has 2 or
4 standard USB connectors that support USB 2.0 and USB 1.1
devices.
✎
The following illustrations identify the standard external features
included in most notebook models. Refer to the illustration that
most closely matches your notebook model.
Hardware and Software Guide
Hardware Components
5–41