Restoring Computer Setup Defaults - HP Compaq NC6110 Software Manual

Computer Setup
2. Select the File, Security, Tools, or Advanced menu.
3. To exit Computer Setup:
❏
❏

Restoring Computer Setup Defaults

To return all settings in Computer Setup to the values that were
set at the factory:
1. To open Computer Setup, turn on or restart the notebook.
Press
displayed in the lower left of the screen.
❏
❏
2. Use the arrow keys to select File > Restore defaults.
3. Select the Restore Defaults check box.
4. To confirm the restoration, press
5. Select File > Save Changes and Exit, then follow the
instructions on the screen.
When the computer restarts, the factory settings are restored, and
any identification information you may have entered is saved.
7–2
To exit without saving any of the settings you may have
entered, use the arrow keys to select File > Ignore
Changes and Exit, then follow the instructions on the
screen.
To exit and save all the settings you have entered, use the
arrow keys to select File > Save Changes and Exit, then
follow the instructions on the screen.
Your preferences are set as you exit Computer Setup and
are in effect when the notebook restarts.
while the F10 = ROM Based Setup message is
F10
To change the language, press
To view navigation information, press
F2.
F1.
F10.
Software Guide