HP Compaq NC6110 Software Manual page 18

Power
Installing Intel SpeedStep
To install Intel SpeedStep technology, select Start > Software
Setup. A setup wizard loads and displays a list of available
applications. Select Intel SpeedStep and follow the instructions
on the screen. You will be prompted to reboot.
After you install SpeedStep, a tab is added to the Power Options
window, an icon is added to the taskbar, and the feature is
automatically enabled on mobile processors.
The default SpeedStep settings are Maximum Performance for
AC Power and Battery Optimized mode for battery power. (For
details on each setting, refer in this chapter to the "Choosing a
Performance Mode" section.)
To access the utility after installation, select the SpeedStep icon
on the taskbar or Start > Settings > Control Panel > Power
Options icon > Intel SpeedStep technology tab.
The SpeedStep icon on the taskbar indicates which SpeedStep
mode is active. Rest the pointer over the icon to display the
current performance mode. Right-click the icon to change the
performance mode.
1–12 Software Guide