Setting Multiboot Preferences; Setting A New Default Boot Sequence - HP Compaq NC6110 Software Manual

I
Changing the boot sequence also changes the logical drive
designations. For example, if you start up from a CD-ROM
drive with a disc that boots as drive C, that CD-ROM drive
becomes drive C, and a hard drive in the hard drive bay
becomes drive D.
I
Starting up from a NIC does not affect logical drive
designations because no drive letter is associated with
the NIC.
I
Drives in a Port Replicator are treated like external USB
devices in the boot sequence and must be enabled in F10
Computer Setup.

Setting MultiBoot Preferences

There are two ways to use MultiBoot:
I
Set a new default boot sequence the notebook uses each time
it starts up.
I
Use variable boot sequences using MultiBoot Express. This
feature prompts you for a startup device each time the
notebook is started or restarted.

Setting a New Default Boot Sequence

Set a startup sequence that the notebook uses each time it is
started or restarted with Computer Setup.
1. To open Computer Setup, turn on or restart the notebook.
Press
displayed in the lower left of the screen.
❏
❏
2. Use the arrow keys to select Advanced > Boot Options, then
press
3. Toggle the MultiBoot field to Enable.
Software Guide
while the F10 = ROM Based Setup message is
F10
To change the language, press
For navigation instructions, press
enter.
F2.
F1.
MultiBoot
5–5