Connecting The Modem Cable - HP Compaq NC6110 Getting Started Manual

Hardware Setup

Connecting the Modem Cable

To connect the modem to an analog telephone line that has
an RJ-11 (modem) jack:
1. Turn the notebook display-side up on a flat surface near
an RJ-11 (modem) jack.
2. If your modem cable contains noise suppression circuitry 1,
which prevents interference with TV and radio reception,
orient the circuitry end of the cable toward the notebook.
3. Plug the modem cable 2 into the RJ-11 (modem) jack on the
notebook.
4. Plug the other end of the modem cable 3 into the
telephone jack.
✎
Telephone wall jacks and modem cables vary in appearance by
region and country.
1–6 Getting Started