Notes:
1. Flexible cord must be <HAR> Type HO3VV-F, 3-conductor,
.75 mm 2 conductor size. Power cord set fittings (appliance coupler
and wall plug) must bear the certification mark of the agency
responsible for evaluation in the country where it will be used.
2. Flexible cord must be Type SPT-2 or equivalent, No. 18 AWG, 3-
conductor. Wall plug must be a two-pole grounding type with a
NEMA 5-15P (15A, 125V) or NEMA 6-15P (15A, 250V)
configuration.
3. Appliance coupler, flexible cord, and wall plug must bear a "T"
mark and registration number in accordance with the Japanese
DENTORI Law. Flexible cord must be Type VCT or VCTF, 3-
conductor, 0.75 mm
grounding type with a Japanese Industrial Standard C8303 (15A,
125V) configuration.
2
conductor size. Wall plug must be a two-pole
Power Cord Set Requirements
D-3