6. Slide the first of two memory boards into the lower memory
slot. Then slide the second board into the top slot. The
connectors snap into place when boards are correctly seated.
7. Replace the memory compartment cover.
8. Turn the computer over again, right side up. Replace the
DualBay device battery pack(s), pointing device, and
reconnect external devices.
9. The computer automatically recognizes the new memory and
reconfigures the system.
CAUTION:
be sure to release the locking tabs that secure the memory boards in
the slots. If the tabs are not released, the connectors may break and
cause irreparable damage to the system board.
Upgrading the Hard Drive
Depending on your computer model, the hard drive can be
upgraded to a larger capacity. Contact your Compaq authorized
dealer, reseller, or service provider for the optional hard drives
available for your computer.
Accessing the Hard Drive Compartment
If you need to remove the memory expansion boards,
Adding Software and Upgrades 11-5
Need help?
Do you have a question about the Armada 4200 and is the answer not in the manual?
Questions and answers