Advertisement
Step 7
B20 ctr
(24)
The main frame pieces give rigidity to
the side walls and provide a surface
for attaching the gables which support
the roof.
1
Fasten the rear wall angle
assembly across the inside top of
the rear wall using screws.
2
Fasten the rear wall channel
assembly across the middle of the
rear wall using screws.
3
Fasten the side wall angles across
the inside top of the side panels using
screws. Side wall angles must overlap
rear wall angle in corners.
4
Fasten the side wall channels
across the middle of the side panels
using screws. Fasten overlaps in rear
corners with screws.
5
Fasten the door track assembly
(holes on top) across the top of the
front wall panels using screws. See
the gure.
Parts Needed For
(2)
Wall Angles
Must Face
Inside
Building
STEP
1
STEP
3
Frames
STEP
2
8476
9920
STEP
4
9378
20
Door Track Assembly (1)
Rear Wall Angle Assembly (1)
8476 Side Wall Angle (2)
Rear Wall Channel Assembly (1)
9920 Side Wall Channel (2)
6615
9924
STEP
Long Leg
on Top
Opening
Facing in
Short Leg
on Bottom
5
Advertisement
