Inserting An Expresscard - HP 4410t Administrator's Reference Manual

Inserting an ExpressCard

CAUTION:
into an ExpressCard slot.
CAUTION:
Use minimal force when inserting an ExpressCard.
Do not move or transport the computer when an ExpressCard is in use.
The ExpressCard slot may contain a protective insert. To remove the insert:
1. Press in on the insert (1) to unlock it.
2. Pull the insert out of the slot (2).
To insert an ExpressCard:
1. Hold the card label-side up, with the connectors facing the computer.
2. Insert the card into the ExpressCard slot, and then push in on the card until it is firmly seated.
You will hear a sound when the device has been detected, and a menu of available options may
be displayed.
NOTE:
to let you know the card is recognized by the computer.
NOTE: An inserted ExpressCard uses power even when idle. To conserve power, stop or remove an
ExpressCard when it is not in use.
To prevent damage to the computer and external media cards, do not insert a PC Card
To prevent damage to the connectors:
The first time you insert an ExpressCard, a message is displayed in the notification area
Inserting an ExpressCard 69