Direct IP Idis DC-T4811WRX Quick Manual page 7

Installation
1
Screw the mounting bracket to the wall or ceiling
by using screws(4) and bushings(4) provided with
the camera.
2
Adjust the camera angle by bending the stand.
After fully assembling the joint screws, unscrew
it 2 ~ 2.5 turns again and move the cover of the
joints of the left 3 places slightly. (The screws
should not be completely released to prevent
it from falling.) After adjusting the direction of
the camera, turn the screw clockwise to secure it
completely.
M4 Screw
3
Connect external devices, network and power
adapter.
4
Apply power.
Network Camera 7