If You Have An External Battery Charger - XPLORE TECHNOLOGIES iX104-TPC User Handbook Manual

Chapter 2. Using the iX104
Using the battery
54
2. Check the level of charge. (See "Checking battery power status"
on page 59.)
The charging process continues until the battery charge reaches
100%.
Table 5 shows the approximate time required to charge the battery
level to 100%.
Table 5 Approximate battery charge time
Battery pack Charge time when the
capacity computer is not in use
4500 mAh 2.5 hours
9000 mAh 3.5 hours
* Varies according to the application(s) in use.

If you have an external battery charger

1. Remove the battery pack (see page 55).
2. Use the external battery charger to charge the battery.
3. Install the battery (see page 57).
Charge time when the
computer is in use*
3.5 hours
5.5 hours
iX104 User's Handbook