Table of Contents
Advertisement
TROUBLESHOOTING > When any problem appears
Network trouble
The network feature does not function
(
The network parameters (IP address) have not been obtained properly.
Enable the DHCP server function on your router and set "DHCP" in the "Setup" menu to "On" on the unit.
For details, see the following:
"Setting the network parameters automatically (DHCP)" (p.215)
(
If you want to configure the network parameters manually, check that you are using an IP address which
is not used by other network devices in your network. For details, see the following:
"Setting the network parameters manually" (p.216)
(
(
The unit is connected to the IPv6 router.
Some network features of the unit do not support IPv6 network. Connect to an IPv4 network.
286
Advertisement
Table of Contents
