Table of Contents
Advertisement
CONFIGURATIONS > Configuring various functions (Setup menu)
Configuring the function settings
Automatically setting the input source names
Automatically sets the input source names depending on the connected external device.
Setup menu
"Function" > "Input Setting" > "Input Rename" > (input)
1
Select an input source to be renamed.
2
Select "Auto".
3
To change another input source name, repeat steps 1 to 2.
4
Press SETUP.
This completes the settings.
NOTE
When "Auto" is selected, the created name is saved even after the external device is disconnected. To reset to the default setting, with
no connection to the corresponding input jack, switch the setting to "Manual" and then back to "Auto".
Related links
"Basic operation of the Setup menu" (p.151)
196
Advertisement
Table of Contents
