Selecting The Remote Control Id - Yamaha RX-V4ABL User Manual

CONFIGURATIONS > Configuring the unit's settings by operation of the body front panel (Front Display menu)

Selecting the remote control ID

Sets the unit's remote control ID so that it matches the remote control's ID. When using multiple Yamaha AV
receivers, set a unique remote control ID for its corresponding receiver.
Front Display menu
"Settings" > "Remote ID"
Settings
ID1, ID2
Changing the remote control ID of the remote control
To select ID1, while holding down the left cursor key, hold down SCENE 1 for 5 seconds.
(
To select ID2, while holding down the left cursor key, hold down SCENE 2 for 5 seconds.
(
NOTE
If the remote control IDs of the unit and the remote control do not match, "Remote ID Mismatch" appears on the front display when
the remote control is operated.
Related links
"Basic operation of the Front Display menu" (p.227)
236