Table of Contents
Advertisement
CONFIGURATIONS > Configuring the unit's settings by operation of the body front panel (Front Display menu)
Backing up and restoring all the settings
Informs the unit's setting to a USB flash drive and restores it to the unit. Prepare a USB flash drive using
FAT16 or FAT32 format in advance.
Front Display menu
"Settings" > "Backup/Restore"
Choices
Backup
Restore
1
Connect the USB flash drive to the USB jack on the front panel.
2
Select "Backup" or "Restore".
3
Select "Execute".
In process, "Executing" is displayed. When the process finishes, "Complete" is displayed. In
case of "Restore", the unit will restart automatically a few seconds later.
If "Error" appears, check the following and start the process again.
In case of "Backup":
You cannot save by overwriting. If you save the settings repeatedly, please move the file in different folder.
(
The file is stored by the name of "MC_backup_(model name).dat" in the route of the USB flash drive.
(
In case of "Restore":
Check that the file is stored in the route of the USB flash drive.
(
NOTE
"Restore" is effective after backing up all the settings.
(
Do not turn off the unit during the backing up and restoring process. Otherwise, the settings may not be restored correctly.
(
The user information (such as account, password) is not saved.
(
You can also backup/restore all the settings in "Backup/Restore" in the "Setup" menu.
(
Related links
"Basic operation of the Front Display menu" (p.227)
Backups all the settings for the USB flash drive.
Restores all the previous backuped settings.
239
Advertisement
Table of Contents
