Advertisement
INSTALLATION INSTRUCTIONS(for 5000 to 12000Btu/h)
BEFORE YOU BEGIN
Read these instructions completely
and carefully.
IMPORTANT-
instructions for local inspector s use.
IMPORTANT-
governing codes and ordinanaces.
Note to Installer
instructions with the Consumer.
Note to Consumer
instructions for future reference.
-
Skill level
Installation of this appliance
requires basic mechanical skills.
Completion time
We recommend that two people install
this product.
Proper installation is the responsibility
of the installer.
Product failure due to improper installation
is not covered under the Warranty.
You MUST use all supplied parts and use
proper installation procedures as described
in these instructions when installing this air
conditioner.
WINDOW REQUIREMENTS
Your air conditioner is designed to install in
standard double hung windows with opening
widths of 23 to 36 inches(584mm to 914mm) .
Save these
Observe all
-
Be sure to leave these
-
Keep these
-
Approximately 1 hour.
H
5000~6000Btu/h
Model
H
13 (330mm)
CAUTION
Do not, under any circumstances, cut or
remove the third (ground) prong from the
power cord.
Do not change the plug on the power cord
of the air conditioner.
Aluminum house wiring may present special
problems- consult a qualified electrician.
When handling unit, be careful to avoid cuts from
sharp metal edges and aluminum fins on front and
rear coils.
TOOLS YOU WILL NEED
TOOLS YOU MAY USE
Screwdriver
Pencil
Ruler or tape measure
Scissors or knife
NOTE:
Save Carton and Installation Instructions
for future reference. The carton is the best way
to store unit during winter or when not in use.
5
H
6000~8000Btu/h 10000~12000Btu/h
14 (356mm) 15-1/2 (394mm)
Table 1
Screwdriver
Level
Advertisement
