Advertisement
INSTALLATION INSTRUCTIONS
4. Attach the top angle to window frame: Use a 3/32
drill bit to drill one hole through the hole in the
middle of top angle into the window frame, and
drive one 3/ 4 (or 1/ 2 ) HEX-HEAD locking screw
through hole in the middle of top angle into the
window frame as shown (Fig.17A).
Fig.17A
7
Attach Window Filler Panels to
W indow Frame
1. Extend the window filler panels out against the
window frame.
2. Use a 1/8" drill bit to drill a starter hole through the
hole in the top leg of each window filler panel and
into the window sash (Fig. 18A and Fig. 18B).
Connect with one 3/ 4 (or 1/ 2") long hex head
screw.
A.3/ 4 (or 1/2 ) long hex head screw
B. Left-hand Window Filler
Panel Top Leg
C. Window channel
A.3/ 4 (or1/2 ) long hex head screw
3/ 4 (or 1/ 2 ) long
HEX-HEAD
SCREW
Fig.18A
Fig.18B
3. Attach the Lock Frames to the winow sill using two
3/ 4 (19mm) screws(Fig.18C)(on some models).
Install W indow
8
8
Safety Lock
1. Trim sash seal to fit window width. Insert into
space between upper and lower sashes(Fig.18).
2. Attach right angle safety lock (Fig.19).
14
Fig.18C
Sash Seal and
Window Sash Seal
Fig.18
Safety Lock
3 4 (or1
/2
)Long
Hex-head Screws
Fig.19
Advertisement
