LG VRD830MGPCM Manual page 42

[IEC 62929 Standard] Setting for Cleaning Performance Test
Dust Removal Test - Box(Hard Floor & Carpet)
1. Put fully charged Robot Cleaner down on start point and turn on.
2. Push 'TURBO' button on the Robot Cleaner or 'Turbo' button on the Remote Controller and Robot
Cleaner will be set Turbo Mode.
3. Push 'Repeat' button on the Remote Controller and Robot Cleaner will be set Repeat Mode.
4. Push 'START/STOP' button on the Robot Cleaner or '
Robot Cleaner will be operated.
Dust Removal Test - Straight Line(Hard Floor & Carpet)
1. Put fully charged Robot Cleaner down on start point and turn on.
2. Push both 'Schedule' button and 'Mode' button for 3 seconds to access
Test Mode(Straight).
3. (1) In case of testing on Hard Floor, LED expression : T-H.
(2) In case of testing on Carpet, LED expression : T-C.
※ Change LED expression by pushing 'Mode' button on the Remote
Controller or 'MODE' button on the Robot Cleaner.
4. Push 'START/STOP' button on the Robot Cleaner or '
Remote Controller and Robot Cleaner will be operated.
[Hard Floor Test mode]
Autonomous navigation/coverage test
1. Put fully charged Robot Cleaner down on start point and turn on.
2. Push 'Repeat' button on the Remote Controller and Robot Cleaner will be set Repeat Mode.
3. Push 'START/STOP' button on the Robot Cleaner or '
Robot Cleaner will be operated.
※ Use this mode only when organizations test cleaning performance or driving performance according
to IEC62929
' button on the Remote Controller and
' button on the
[Carpet Test mode]
' button on the Remote Controller and
41