Grizzly H8370 User Manual

Specifications
Motor ................................................. 110V 60Hz
Speed ............................................... 4–200 RPM
Maximum Torque .................................440 in./lb.
Bevel Gear to Drive Gear Ratio ..................... 4:1
Inventory
Refer to Figure 1 and the table below to inventory
the contents of the shipping box.
REF PART # DESCRIPTION
1 PH8370001 MOUNTING ASSEMBLY
2 PH8370002 GEAR SAFETY COVER
3 PH8370003 POWER FEED & LIMIT SWITCH ASSY
4 PH8370004 LIMIT STOP
5 PH8370005 LIMIT SWITCH BRACKET
6 PH8370006 LEADSCREW GEAR
7 PH8370007 RAPID SWITCH
8 PH8370008 ZYTEL GEAR
If any nonproprietary parts are missing (e.g. a
washer or a spacer), we will gladly replace them;
or for the sake of expediency, replacements can
be obtained at your local hardware store.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
COPYRIGHT © MARCH, 2008 BY GRIZZLY INDUSTRIAL, INC.
#TS10533 PRINTED IN TAIWAN
MODEL H8370
POWER FEED
FOR MILL/DRILLS
INSTRUCTIONS
�
�
�
�
�
Figure 1. Model H8370 inventory.
If you need help with your new power feed, call
our Tech Support at: (570) 546-9663.
�
�
�
Wear safety glasses dur-
ing the entire setup pro-
cess!