Henny Penny Wendy's MP94 Series Quick Reference Manual

Unit Operation
1. Turn unit on.
2. The time of day or " On " is displayed.
3. Press and hold the temperature button at any time to display the actual
temperature of the drawer. The led above the temperature button will blink
slowly.
Temperature Setpoint Programming
1. Press and hold the temperature button for 6 seconds. The actual
temperature will be shown first followed by the flashing setpoint.
2. Once the setpoint is flashing in the display, continue holding the temperature
button and press the SET button. Release all buttons. The setpoint is
flashing quickly in the display.
3. Use the up and down buttons to change to the desired setpoint. Hold in the
up or down buttons to change the setpoint value quicker.
4. Once the desired setpoint temperature is reached, press SET to exit setpoint-
programming mode.
Time of Day Clock Programming
1. Press and hold the SET button.
2. Use the up and down buttons to program the desired time. Hold in the up or
down button to change the time value quicker.
3. Once the desired time value is reached, release the SET button.
Wendy's MP94X Quick Reference Guide