Table of Contents
Advertisement
1.2
Compatibility
1.3
Technical changes
1.4
Warranty conditions
1.5
Copyright
6 / 51
The operating unit is available as an accessory for the following LAUDA
product lines:
Integral IN
PRO (with "Base" operating unit)
LiBus interface
The constant temperature equipment must have a free LiBus inter-
face for connecting the operating unit.
An interface module can be provided for this purpose if necessary.
If you have any questions about technical adaptations, please con-
tact the LAUDA service; see Ä Chapter 1.6 "Contact LAUDA"
on page 7.
All technical modifications are prohibited without the written consent of the
manufacturer. Damage resulting from a failure to observe this condition will
void all warranty claims.
However, LAUDA reserves the right to make general technical modifica-
tions.
LAUDA grants a standard warranty of one year.
This operating manual was written in German, checked and approved. If
the content of other language editions deviates from the German edition,
the information in the German edition shall take precedence. If you notice
any discrepancies in the content, please contact LAUDA Service, see
Ä Chapter 1.6 "Contact LAUDA" on page 7.
Company and product names mentioned in the operating manual are usually
registered trademarks of the respective companies and are therefore subject
to brand and patent protection. Some of the images used may also show
accessories that are not included in the delivery.
All rights reserved, including those relating to technical modifications and
translations. This operating manual or parts thereof may not be modified,
translated or used in any other capacity without the written consent of
LAUDA. Violation of this may obligate the violator to the payment of dam-
ages. Other claims reserved.
Command Touch operating unit
V1
Advertisement
Table of Contents
