Table of Contents
Advertisement
Input window with date entered
Fig. 8: Entering the date
6.2.4 Graph window
Fig. 9: Graph window
Displaying the graph window
16 / 51
You can cancel or reject your change or adopt it as the new active value.
Press the [C] button to delete the new value and display the original
value again.
Press the [<] button to go back to the previous display without any
changes.
Press the [OK] button to save and activate the displayed value and to go
back to the previous display. Invalid values will not be accepted.
Time or date values are entered in the same way as entering numerical values.
However, the following special features must be observed:
You can select the time format to be displayed in the basic settings. For
instance, you can select the US-American date format mm/dd/yy and
the am–/–pm format.
When you select the value you wish to change, a group of digits is
selected and underlined in the input field. The values are entered as two
digits, i.e. with two numerical keys.
With the Command Touch operating unit, you can display the following
temperature profiles in the form of a graph:
T
(white line)
set
T
(green line)
int
T
(purple line, not shown) - External actual temperature (application)
ext
1.
Tap the [Maximize] icon at the bottom center of the Home window.
The graph window containing the temperature profile appears.
2.
Touch T
or T
to show or hide the respective temperature curve.
int
ext
This acts as a shortcut to the Settings Graph settings Displayed
measured values menu item.
3.
Tap the temperature scale or the time scale to open the Graph
settings submenu.
This acts as a shortcut to the Settings Graph settings menu.
4.
Tap the [Minimize] symbol in the top right of the graph window.
The Home window appears.
Command Touch operating unit
- Set temperature
- Internal actual temperature (bath tem-
perature)
V1
Advertisement
Table of Contents
