Lauda V1R20 Operation Manual page 41

Importing data
Fig. 34: Program files on USB stick
Log file
Fig. 35: Log file in PDF format
V1
Only import unmodified export data!
Manually modified data sets can cause the constant temperature
equipment to malfunction or block.
Apart from the log file, you can import all exported data sets to any
Command Touch-type operating unit. The import process is similar to the
export process:
Connect the USB storage medium with the export data to the USB inter-
face.
1. Open the Home window.
2.
Select the Settings  Data import tiles.
The Import data menu is displayed.

The [Program], [User database], [Control parameters]and
[Parameter sets] buttons can be selected.
3. Tap the button for which you would like to import a data set.
The existing data sets can be seen on the USB storage medium.

4. Choose the data set you require and confirm your selection with the
[OK] button.
The data set is loaded.

If the import fails, you will receive a corresponding message.
5. Carry out further exports/imports if necessary.
Finally, remove the USB storage medium and replace the cover to
protect the USB interface.
The file name of the log file is created from the abbreviation "LOG_" plus a
time stamp. The time stamp corresponds to the date of the first log entry.
Depending on the file format, the file names have the following format:
LOG_YYYYMMDDhhmmss.txt (text file)

LOG_YYYYMMDDhhmmss.pdf (PDF)

The time stamp itself is made up of the following date information:
YYYY - Date: Year, 4-digit
MM - Date: Month, 2-digit
DD - Date: Day, 2-digit
hh - Time: Hour, 2-digit
mm - Time: Minute, 2-digit
ss - Time: Second, 2-digit
Command Touch operating unit 41 / 51