Basic Settings - Lauda V1R20 Operation Manual

6.3

Basic settings

Fig. 12: Basic settings
18 / 51
[Limit maximum] and [Limit minimum]

Here you can define the upper and lower temperature value of the

graph window (corresponds to scaling of y axis).
Note: When setting the two limit values manually, make sure that

the temperature curves fall within the range of the two limit values,
otherwise the temperature curves will not appear on the graph. You
must enter the absolute temperature values.
[Tolerance range of graph]: A graphic tolerance range curve T

be defined around the temperature and displayed to visually assist the
control accuracy of the displayed temperature curve T
Touch the [Display tolerance range] button to change the settings.
Placing or removing a check mark next to the [Display tolerance

range] button displays or hides the tolerance range in the graph
window.
Touching the [Maximum limit value tolerance range] or [Minimum

limit value tolerance range] button opens the input window.
Enter a positive and a negative distance to the T

tolerance range around the temperature curve.
1. Open the Home window.
2.
Tap the Settings  Basic settings tile.
The constant temperature equipment settings are listed here,

among other things, in the basic settings menu of the
Command Touch operating unit. These are explained in more
detail below.
Command Touch operating unit
can
set
.
set
set point for the
set
V1