Using Programs - Lauda V1R20 Operation Manual

7.2.2 Using programs

Running programs
Fig. 26: Programs tile
Fig. 27: List of programs in the programmer
Program status
Fig. 28: Currently active program
32 / 51
1. Open the Home window.
2. Touch the [Programs] tile.
The list of available programs appears.

3. Push the list of programs until you can see the program you require.
4. Use one of the following buttons to run the associated program:
: Start/continue a program.

: Pause program.

: End program.

When switching the constant temperature equipment to Standby
mode, a running program is automatically paused.
The [Program] tile on the Home window always shows the currently active
program and its status. You can see the following information:
Tile symbol which shows the current program status with one of the

following symbols:
: Program running.

: Program paused.

Number of segments currently being processed.

Total number of segments.

Name of the program.

Command Touch operating unit V1